内页720×540 拷贝1 英文.jpg
内页720×540 拷贝3.jpg
内页720×540 拷贝5.jpg
细胞培养瓶2.jpg
内页720×540 拷贝2.jpg
内页720×540 拷贝4.jpg

Zell- und Gewebekulturkolben

Spezifikation: T12.5 T25 T75 T150 T175 T182 T182 (Zusatzhöhe) T225 T300

Kappentyp: Entlüftung der Verschlussdichtung

Oberfläche: Unbehandelt TC-behandelt    CellATTACH®-behandelt

Angebot anfordern
Einleitung
Produktinformationen
Bestellinformationen
FAQ
Empfohlene Produkte

Einleitung

Produktinformationen

Zell- und Gewebekulturkolben sind die am besten geeigneten Kulturgefäße für langfristige und großräumige Laborzellkulturen und verhindern gleichzeitig Kontaminationen. Kolben mit unbehandelter Oberfläche eignen sich für Suspensionszellkulturen, während Kolben mit TC-behandelter Oberfläche aufgrund der ausgezeichneten Hydrophilie der Polystyroloberfläche für häufig haftende Zelllinien geeignet sind. Die mit CellATTACH® behandelte superhydrophile Oberfläche stellt einen technischen Fortschritt dar, der die Adhäsion und das Wachstum von schwer zu ernährenden Zellen, Primärzellen und Transfektionszelllinien bei niedrigen Serum-/serumfreien Bedingungen verbessert.
Hydrophobe 0,22-µm-PTFE-Entlüftungskappe unterstützt den Gasaustausch  und verhindert Kreuzkontamination.

Hydrophobe 0,22-µm-PTFE-Entlüftungskappe unterstützt den Gasaustausch und verhindert Kreuzkontamination.

Ergonomisches Kappendesign –  Öffnen/Schließen durch 1/4-Drehung.

Ergonomisches Kappendesign – Öffnen/Schließen durch 1/4-Drehung.

Der geneigte Flaschenhals erleichtert  das Ausgießen von Flüssigkeiten sowie  die bequeme Handhabung von Pipetten  und Zellschabern.

Der geneigte Flaschenhals erleichtert das Ausgießen von Flüssigkeiten sowie die bequeme Handhabung von Pipetten und Zellschabern.

Auf beiden Seiten sind klare Graduierungen  zu sehen, und der mattierte Bereich kann  markiert werden.

Auf beiden Seiten sind klare Graduierungen zu sehen, und der mattierte Bereich kann markiert werden.

Eigenschaften

* Verschiedene behandelte Oberflächen eignen sich für unterschiedliche Kulturbedürfnisse
* Die hydrophobe Entlüftungskappe sorgt für eine kontinuierliche Belüftung, ermöglicht durch 1/4-Drehung der Kappe
* Der geneigte Hals erleichtert den einfachen Zugang zu Pipetten und Zellabstreifern
* Die flache Bauweise unterstützt die effektive Nutzung des Innenraums des Inkubators im Stapelbetrieb
* Der mattierte Bereich in der Nähe des Halses kann beschrieben werden
* Auf beiden Seiten gegossene Volumengraduierungen
* 100 % auf Leckage in der Produktionslinie getestet
* Chargennummer auf der Unterseite jedes Kolbens und jeder Packung Beutel für Rückverfolgbarkeit der Qualität
* Sterilisiert durch Bestrahlung, SAL 10-6
* DNase/RNase-frei, pyrogenfrei und nicht zytotoxisch

Material

* Kolbenkörper: Polystyrol (PS)
* Flaschenverschluss: Polyethylen hoher Dichte (HDPE)
* Filtermembran: Polytetrafluorethylen (PTFE)
* USP Klasse VI-konform

Produktinformationen

T225 Zell- und Gewebekulturkolben

Broschüre

T225 Zell- und Gewebekulturkolben

Datei-Download
T150 U-förmige Zell- und Gewebekulturflasche

Broschüre

T150 U-förmige Zell- und Gewebekulturflasche

Datei-Download
T150 U-Shaped Cell and Tissue Culture Flask
Jet Biofil DE Katalog 2024

Katalog

Jet Biofil DE Katalog 2024

Datei-Download

Bestellinformationen


Zell- und Gewebekulturflaschen, unbehandelt
Kat. Nr. Volumen (mL) Zellkulturoberfläche(cm²) Kappentyp Maximales Arbeitsvolumen(mL) Länge(mm) Breite(mm) Höhe (mm) Botte Neck Diameter(mm) Steril
Anz. pro Beutel
Anz. pro Karton
TCF001025 25 12.5 Verschlussstopfen 8.0 73.7 40.4 22.8 14.2 J 10 200
TCF002025 25 12.5 Entlüftung 8.0 73.7 40.4 22.8 14.2 J 10 200
TCF001050 50 25.0 Verschlussstopfen 17.5 92.9 49.5 29.1 18.2 J 10 200
TCF002050 50 25.0 Entlüftung 17.5 92.9 49.5 29.1 18.2 J 10 200
TCF001250 250 75.0 Verschlussstopfen 60.0 152.5 81.5 35.2 25.0 J 5 100
TCF002250 250 75.0 Entlüftung 60.0 152.5 81.5 35.2 25.0 J 5 100
TCF001150 375 150.0(U-förmig) Verschlussstopfen 140.0 199.7 111.3 111.3 25.6 J 5 8
TCF002150 375 150.0(U-förmig) Entlüftung 140.0 199.7 111.3 111.3 25.6 J 5 50
TCF001175 600 175.0 Verschlussstopfen 250.0 199.9 122.7 49.2 25.7 J 5 50
TCF002175 600 175.0 Entlüftung 250.0 199.9 122.7 49.2 25.7 J 5 50
TCF001600 600 182.0 Verschlussstopfen 125.0 219.3 115.7 38.3 29.5 J 5 40
TCF002600 600 182.0 Entlüftung 125.0 219.3 115.7 38.3 29.5 J 5 40
TCF101600 600 182.0 (Extra Höhe) Verschlussstopfen 200.0 219.3 115.7 49.5 29.5 Y 5 40
TCF102600 600 182.0 (Extra Höhe) Entlüftung 200.0 219.3 115.7 49.5 29.5 J 5 40
TCF001225 850 225.0 Verschlussstopfen 400.0 221.9 137.2 49.5 25.7 J 5 25
TCF002225 850 225.0 Entlüftung 400.0 221.9 137.2 49.5 25.7 J 5 25
TCF001850 850 300.0 Verschlussstopfen 200.0 269.2 166.0 47.0 29.5 J 3 18
TCF002850 850 300.0 Entlüftung 200.0 269.2 166.0 47.0 29.5 J 3 18
Zell- und Gewebekulturflaschen, TC-behandelt
Kat. Nr. Volumen(mL) Zellkulturoberfläche(cm²) Kappentyp Empfohlenes Arbeitsvolumen(mL) Maximales Arbeitsvolumen(mL) Länge(mm) Breite(mm) Höhe (mm) Botte Neck Diameter(mm) Steril
Anz. pro Beutel
Anz. pro Karton
TCF011025 25 12.5 Verschlussstopfen 2.5-3.8 8.0 73.7 40.4 22.8 14.2 J 10 200
TCF012025 25 12.5 Entlüftung 2.5-3.8 8.0 73.7 40.4 22.8 14.2 J 10 200
TCF011050 50 25.0 Verschlussstopfen 5.0-7.5 17.5 92.9 49.5 29.1 18.2 J 10 200
TCF012050 50 25.0 Entlüftung 5.0-7.5 17.5 92.9 49.5 29.1 18.2 J 10 200
TCF011250 250 75.0 Verschlussstopfen 15.0-22.5 60.0 152.5 81.5 35.2 25.0 J 5 100
TCF012250 250 75.0 Entlüftung 15.0-22.5 60.0 152.5 81.5 35.2 25.0 J 5 100
TCF011150 375 150.0 (U-förmig) Verschlussstopfen 30.0-45.0 140.0 199.7 111.3 111.3 25.6 J 5 50
TCF022150 375 150.0 (U-förmig) Entlüftung 30.0-45.0 140.0 199.7 111.3 111.3 25.6 J 5 50
TCF011175 600 175.0 Verschlussstopfen 35.0-52.5 250.0 199.9 122.7 49.2 25.7 J 5 50
TCF012175 600 175.0 Entlüftung 35.0-52.5 250.0 199.9 122.7 49.2 25.7 J 5 50
TCF011600 600 182.0 Verschlussstopfen 36.4-54.6 125.0 219.3 115.7 38.3 29.5 J 5 40
TCF012600 600 182.0 Entlüftung 36.4-54.6 125.0 219.3 115.7 38.3 29.5 J 5 40
TCF111600 600 182.0 (Extra Höhe) Verschlussstopfen 36.4-54.6 200.0 219.3 115.7 49.5 29.5 J 5 40
TCF112600 600 182.0 (Extra Höhe) Entlüftung 36.4-54.6 200.0 219.3 115.7 49.5 29.5 J 5 40
TCF011225 850 225.0 Verschlussstopfen 60.0-90.0 400.0 221.9 137.2 49.5 25.7 J 5 25
TCF012225 850 225.0 Entlüftung 60.0-90.0 400.0 221.9 137.2 49.5 25.7 J 5 25
TCF011850 850 300.0 Verschlussstopfen 60.0-90.0 200.0 269.2 166.0 47.0 29.5 J 3 18
TCF012850 850 300.0 Entlüftung 60.0-90.0 200.0 269.2 166.0 47.0 29.5 J 3 18
CellATTACH®Zell- und Gewebekulturflaschen
Kat. Nr. Volumen (mL) Zellkulturoberfläche(cm²) Oberflächentyp Maximales Arbeitsvolumen(mL) Empfohlenes Arbeitsvolumen(mL) Kappentyp Steril
Anz. pro Beutel
Anz. pro Karton
CAF011025 25 12.5 CellATTACH® Behandelt 8.0 2.5 - 3.8 Verschlussstopfen J 10 200
CAF012025 25 12.5 8.0 2.5 - 3.8 Entlüftung J 10 200
CAF011050 50 25.0 17.5 5.0 - 7.5 Verschlussstopfen J 10 200
CAF012050 50 25.0 17.5 5.0- 7.5 Entlüftung J 10 200
CAF011250 250 75.0 60.0 15.0 - 22.5 Verschlussstopfen J 5 100
CAF012250 250 75.0 60.0 15.0 - 22.5 Entlüftung J 5 100
CAF011600 600 182.0 125.0 36.4 - 54.6 Verschlussstopfen J 5 40
CAF012600 600 182.0 125.0 36.4 - 54.6 Entlüftung J 5 40
CAF111600 600 182.0(Extra Höhe) 200.0 36.4 - 54.6 Verschlussstopfen J 5 40
CAF112600 600 182.0(Extra Höhe) 200.0 36.4 - 54.6 Entlüftung J 5 40
CAF011850 850 300.0 200.0 60.0 - 90.0 Verschlussstopfen J 3 18
CAF012850 850 300.0 200.0 60.0 - 90.0 Entlüftung J 3 18

FAQ

FAQ about cell culture plates/bottles/dishes

* What does TC-treated in the product name mean?

TC-treated means that Tissue Cultured is used to treat the surface. By means of corona discharge or gas plasma, Jet Biofil can improve the hydrophilicity of polystyrene (PS) surface, improve the adhesion of proteins needed for cell adhesion, and thus help cells adhere to the wall.

 

* Which surface should I use to culture suspension cells?

The suspension cells do not have the need for cell adhesion, and generally the culture supplies for untreated surface can be used. TC-treated surface can also culture suspension cells, but according to the state and type of cells, some cells may appear adhesion phenomenon.

 

* If I want to coat extracellular matrix myself, what kind of surface should I use?

You can choose the culture vessel with untreated surface to coat the extracellular matrix by yourself. Of course, in this case, vessels with TC-treated surface can also be used

 

* How to use the cell culture bottle with a sealed cap? What are the differences between the use of cell culture bottles with filter membrane caps?

Cell culture bottles with sealed caps provide a closed cell culture environment. If it is needs to connect with the air in the incubator, it is necessary to slightly loosen the cap after the bottle is put into the incubator to allow air to enter. Similarly, when taking out the bottle, tighten the cap first and then take it out. The cap with the filter membrane itself has the function of breathable, and the filter membrane can prevent microbial contamination. Therefore, the cap of the culture bottle can be directly tightened and put into the incubator during use, but it needs to be noted that the filter membrane on the cap cannot be wet, wet filter membrane cannot ensure the passage of gas.

 

* What does T25, T175 mean that I often hear?

Taking T25 as an example, it refers to a cell culture bottle with a growth surface area of 25 cm2. According to the type of bottle cap and different culture surfaces, different article numbers correspond to different products.

 

* I bought the product with article number xxxxxx. What is its growth area? How much medium should I add to culture my cells?

We recommend using 0.2-0.3mL/cm2 of medium

 

* The cell culture bottle/dish I bought is not vacuum packed. The bag looks loose. Is there a quality problem?

The cell culture supplies of Jet Biofil are not vacuum packed, and are only manually aspirated for convenient transportation, so there will be differences. In addition, the temperature and air pressure in different regions will also affect the tightness of the packaging. If there is no air leakage in the package and the cap does not fall off from the product, it will not affect the sterility of the product and the quality of the product. Please feel relieved the use. If the package is damaged or the air leaks or the cover falls off from the product, please take a photo and submit a complaint through your dealer. At the same time, please pay attention to provide a photo of the outer box of the product. When you receive the goods, please carefully confirm whether the outer box is damaged or deformed.

 

* I can’t use up a package of culture supplies in one experiment. How should I preserve it?

We cannot guarantee the sterility of the product after opening. We suggest that you store it in a sterile environment, control the temperature and humidity of the environment, and avoid the storage under light/ultraviolet irradiation.

 

* I used the culture bottle/dish/plate of Jet Biofil, and the cells did not adhere to the wall. Is it a product quality problem?

There are many factors that lead to non-adherent cells, such as culture medium composition and pH value, culture environment, digestion operation, cell type, cell passage, etc. If you use the same product with the same article number to culture the same cell strain for a long time, and the cells adhere normally before, but do not adhere to the wall now, it is recommended that you timely record the batch number of the products used in both cases, and conduct repeated parallel experiments, that is, use cells from the same source to spread on the supplies of these two batches for culture (pay attention to using the culture medium from the same source). Culture in the same incubator to determine the main reason why cells do not adhere to the wall.

 

* The color of the culture bottle/dish/plate I bought this time is more yellow than that of last time. Is it a product quality problem?

It is normal that plastic consumables of different batches may turn yellow after irradiation sterilization.


FAQ

Empfohlene Produkte

Return to Previous Page