内页720×540 拷贝.jpg

Milk Pipets

Specification: 1.1 mL  2.2 mL
Packaging: Individual Package (Paper/Plastic)   Bulk

Get Quotation
Introduction
Product Information
Order Information
FAQ
Recommended Products

Introduction

Product Information

Suitable for the aspiration and transfer of micro-quantity liquids.

Features

* Each pipet specification has a filter plug to prevent aerosol or liquids from contaminating the pipetting device and to reduce the risk of contamination between samples
* Designed with double graduations, to facilitate the identification of pipetting volumes. Negative gradations enhance pipet capacity and satisfy requirements for large volumes
* The graduation is clear and accurate, with accuracy up to ±2% of the total volume
* Available in bulk packaging and individual packaging wrap with printed lot No. for quality traceability
* Irradiation sterilization, SAL 10-6
* DNase/RNase-free, non-pyrogenic

Material

* Polystyrene (PS)
* Conforming to USP Class VI standards

Product Information

Jet Biofil ENG Catalogue 2025

Catalogue

Jet Biofil ENG Catalogue 2025

Download File

Order Information


Serological Pipets Individually Package(paper/plastic)

Cat. No. Volume (mL) Length(mm) Color Code Sterile Qty. Per Bag Qty. Per Case
GSP010011 1.1 268.5 Purple Y 25 1000
GSP020011 1.1 268.5 Purple Y 50 500
GSP010022 2.2 272.0 Black Y 50 400



Serological Pipets Bulk Vacuum Package

Cat. No. Volume (mL) Length(mm) Color Code Sterile Qty. Per Bag Qty. Per Case
GSP011011 1.1 268.5 Purple Y 1 1000
GSP021011 1.1 268.5 Purple Y 1 250
GSP011022 2.2 272.0 Black Y 1 250

FAQ

FAQ about liquid treatment supplies

* What kind of process does the ultra-low adsorption product belong to? Is that silane treatment?

The ultra-low adsorption products of Jet Biofil are not treated with silane. With the improvement of polypropylene resin materials and the use of ultra-smooth polishing and molding technology, the ultra-low adsorption product can achieve zero chemicals addition on the surface to reduce the combination of samples and surfaces and reduce sample loss.

 

* Can ultra-low adsorption products be sterilized?

No, they can’t. If you need sterile products, you can buy the corresponding sterilized ones. But the ultra-low adsorption surface may be affected if the customer self-sterilizes, finally affecting the service performance.

 

* Can the products with the filter tips be sterilized?

No, they can’t. If you need sterile products, you can buy the corresponding sterilized ones. But the ultra-low adsorption surface may be affected if the customer self-sterilizes, finally affecting the service performance.

 

* Are the graduations on the serological pipets accurate?

The accuracy of all the serological pipets is measured at full volume. The accuracy is ±2% of the total volume

 

* What is the rubber plug in the serological pipet used for?

The rubber plug can prevent the liquid from splashing or sucking back into the pipet to some extent, avoiding the aerosol diffusion and cross contamination among the samples.


FAQ

Recommended Products

Return to Previous Page